A-132
GPS Flange 天線
A-132GPS天線，在底端具有RF保護隔離設備，和一個3英寸的鋁製緣盤，以加強GPS信號之接收。A-132 備有3組信號雜訊濾波器和2階段訊號放大器，這將能提供GPS設備最準確的信號。A-132強大的信號接收，最適合有整合或開發自己GPS產品能力的客戶。A-132 可專門做為多功能的整合應用，如GPS追蹤產品等等。天線為標準的電源輸入，電壓範圍從3V〜6V。如同極星所生產的其它天線一樣，A-132符合RoHS的標準。
A-132 GPS Active Antennas is the only innovating design antenna with performance, quality and a
Power protection circuit built-in to protect the active LNA’s, and most importantly the host GPS
receiver down the connector end from the danger of a SHORT circuit external antenna (Note: GPS
receiver front-end can be destroyed or de-graded by an external GPS antenna in an over-load or
short conditions. The A-132 is a low profile GPS active antennas system for the next generation
multi-purpose GPS mobile antenna products for Telematics, Fleet Management, Navigations and
AVL applications. This small print size of the antenna design does not reflect over-all performance,
since the antenna itself needs no ground plane aid to deliver the L1 band small signal carrier that
originates from the 24 orbiting USA satellites located thousands of miles over-head and with the
ground reception power sensitivity at over -130dB. The A-132 antenna is also design as a standard
power input voltages in range from +3Vdc to +6Vdc with reverse polarity shutdown, over-current
sense shutdown and an EMC power line suppression. The most important over-all design concept of
the A-132 GPS Active Antennas is the complete protections of the host sensitive GPS receiver
made from any manufacturer that it serve and can also be destroy or de-grade using an improper
design antenna
| General | |
| 2 Stages active LNA | |
| Dual Filters, (HPF & LPF(lump element)) | |
| +28dB gain | |
| Dielectric Patch antenna | |
| Low Noise Low drop-out, Linear Regulator | |
| GPS receiver short circuit protect | |
| Low Loss RG/174 Coax cable | |
| Aluminum Base/ PC+ Radome Plastic | |
| Performance | |
| Receiving Frequency | L1 Band(1575MHz) |
| Output Impedance | 50 ohms |
| Polarization’s | Right Hand Circular (RHC) |
| Bandwidth | 10dB Mhz @ -3dB point |
| VSWR | 1.5 Typical @ 1575MHz |
| Elev. Angle Coverage | 5~90 degree |
| Az. Bearing Coverage | 360 degree |
| Filtering | Dual(BPF <10 Mhz B/W, LPF @1576 MHz Stop-band @ 1585MHz) |
| Over-all Gain | 28dB (typical including 4dB cable loss & Filters) |
| Over-all NF | <1.8dB @fo, 2dB max. |
| LNA Characteristic | K=>1 Un-conditionally Stable |
| RF Insertions loss | K=>0.1dB, leakage power 100mW /1 watt input |
| Power Consumption | 11mA to 13mA (max) |
| Power Input Sensor | Reverse Polarity Short Circuit shutdown |
| Over-Current Sensor | Thermal Over-current shutdown >+150degreeC |
| Electrical | |
| Power Input | +3Vdc to + 6Vdc input, Auto Switching |
| Physical | |
| Dimensions | 31 x 24.5 x 7mm +/-0.5mm |
| Mount | Magnetic |
| Radome Color | Black |
| Coax Connector | BNC, SMA, SMB, MCX, MMCX, GT-5 |
| Coax Cable | RG-174U double shielded 5m, Low Loss 0.7dB/m |
| Environmental | |
| Operating Temperature | -30 to + 85 degree C |
| Storage | -40 to + 90 degree C Open Frame with 3” Flanges & RF shield |
| File Name | File Size | Time |
| A-132 ARKNAV-Datasheet | 825 KB | Sep 18th 2009 |