Technical Specifications |
2 Stages active LNA |
Dual Filters, (BPF(dielectric) & LPF(lump element)) |
RF protection (10watt), nano-second Spark-Gap |
Dielectric Patch antenna |
Low Noise Low drop-out, Linear Regulator |
Performance |
Receiving Frequency |
L1 Band(1575MHz) |
Output Impedance |
50 ohms |
Polarization’s |
Right Hand Circular (RHC) |
Bandwidth |
< 50 MHz |
VSWR |
1.8 Typical @ 1575MHz |
Elev. Angle Coverage |
5~90 degree |
Az. Bearing Coverage |
360 degree |
Filtering |
Dual(BPF <50 MHz B/W > |
Over-all Gain |
28dB (typical including 4dB cable loss & Filters) |
Over-all NF |
<1.8dB @fo, 2dB max. |
LNA Characteristic |
K=>1 Un-conditionally Stable |
RF Insertions loss |
0.1dB, leakage power 100mW /1 watt input |
Electrical |
Power Input |
+3Vdc to + 6Vdc input, Auto Switching |
Power Consumption |
25mA |
Power Input Sensor |
Reverse Polarity Short Circuit shutdown |
Over-Current Sensor |
Thermal Over-current shutdown >+150degreeC |
Physical |
Dimensions |
79d x 58h x 13 mm (CHECK THIS!!) |
Mount |
13 mm treaded (1/2inch) |
Radome Color |
White |
Coax Connector |
BNC,SMA,TNC or on request |
Coax Cable |
RG-58, RG-174, RG-316 |
Environmental |
Operating Temperature |
-30 to + 85 degree C |
Storage |
-40 to + 90 degree C
|